Description
Features
Specifications

      DESCRIPTION:

PDI Communications, Inc. PDI-60AP is a professional quality, user friendly, high performance TV signal processor designed primarily for CATV headend operation. Rock solid PLL controlled tuning by advanced microprocessor insures precise UHF, VHF or CATV (STD-HRC) channel access. Careful design of the input achieves a wide dynamic range and a very low noise figure. Input tuning covers the range of 54 to 860MHz with the ability to properly receive CATV channels already offset 12.5 or 25 kHz as in node operation. The agile output ranges from 54 to 860MHz and is controlled by another PLL circuit with 12.5 or 25kHz offsets. Both the input and output channels have non-volatile memories that restore the channels automatically in the event of a power failure. SAW filtering guarantees broadcast quality pictures. A standby oscillator provides a CW video carrier level for system pilot AGC if the input drops below a useable level.

$825.00 per Unit - *Plus Shipping/ Handling
* Shipping amounts will vary, depending on size, weight & destination. ALL shipping charges will be invoiced AFTER the order has been processed.


  FEATURES:
+60dBmV RF output with very low spurious response
Quantity :
$825.00 PER UNIT
Professional grade SAW filters allow true adjacent channel operation
Non-volatile channel memories
Externally selectable FCC offsets
User friendly channel selection
Wide input AGC holds output constant
BTSC stereo compatible
HRC available
Microprocessor controlled PLL tuning for precise frequency control
Composite IF loop-through for scrambling or IF insertion
Brushed aluminum faceplate
UL listed Canada/U.S.
2 year warranty
UL listed Canada/U.S.
ISO 9002 certified
Also available in all PAL configurations
SPECIFICATIONS:  
INPUT SECTION
Input Frequency Range 54 to 860MHz
Input Channels UHF, VHF, CATV (STD, HRC)
Input Level Range -15 to +20dBmV (0 to 10dBmV recommended)
Noise Figure 7.5dB @ VHF
11dB @ UHF
AGC Range ±20dB
AGC Stability ±0.5dB
Impedance 75ohms
IF  SECTION
IF Frequency 45.75MHz Picture
41.25MHz Sound
IF Output Level +18dBmV +2dB
IF IN/OUT Impedance 75ohms (14dB return loss min.)
VSB Response > -60dB typical (at adjacent picture and sound)
OUTPUT SECTION
Output Frequency 54 to 860MHz
Frequency Stability ±5kHz max.
Spurious Output -60dBc (@ 60dBmV with aural carrier - 15dBc)
Group Delay Response Meets FCC requirements
Frequency Response ±1dB max. in channel
Output Offsets 0, +12.5kHz and +25kHz
GENERAL
Power Requirements 117 VAC ±10%, 60Hz, 28 W
Temperature Range 0 to +50 degrees C
Rear Panel Connections RF Input F Female
RF Output F Female
IF Loop F Female
AC Convenience 3 Cond. Polarized w/Ground
Front Panel Controls RF Output Level Adjust
Audio Carrier Level Adjust
Output Offset Adjust
Input Channel Set
Output Channel Set
Off Air, CATV, HRC Set
   
Back
Purchase
Contact Us